Contact Us Today for a Free Quote |
Request Info |
Gemstone Concrete Coatings,Inc.
Maintenance Instructions
Guidelines on the care and upkeep of the Gemstone concrete coating system.
Congratulations on your selection of the Gemstone concrete coating system. The coating system
you have chosen is the performance leader in acrylic modified decorative coating systems. The
Gemstone concrete coating system will provide years of protection and performance if you follow
these maintenance and cleaning guidelines.
1. Keep the area clean. – Dirt, gravel, sand, and debris should be regularly removed from the
surface by a broom, blower, or water w/ pressure nozzle.
2. Wash periodically. – Clean the surface with water and Gemclean and/or Gemacid soap, or a
mild detergent solution. For best results, agitate the solution with a stiff bristle broom and
rinse with water. Pressure wash if necessary. (See cleaning instructions for further details.)
***NOTE.***SOLVENTS. – Never use xylene, xylol, lacquer thinner, MEK, acetone, or any
other solvent to clean the coating.
3. Planters and flower boxes. – It is recommended that a planter with a self contained drainage
system be used. If planters freely drain onto the area, they should be moved every 1 – 2 months
to allow the area to completely dry. However, it is preferable that planters be raised off the
ground with 1 inch slats to allow circulation of air.
4. Furniture. – All metal patio furniture should have rubber or plastic nosing on the legs. Avoid
using iron or extra heavy furniture. Never drag across surface. When moving heavy appliances,
or equipment, please use cardboard or carpet over surface.
5. Outdoor Carpet. – Outdoor carpet or rubber mats should not be used over the Gemstone concrete coating system for any period of time. Never permanently glue carpet to the coating.
6. Damage. – Should any damage occur contact Gemstone Concrete Coatings, Inc.
as soon as possible. Additional damage may occur or additional expense may be
involved if any damages are not promptly addressed.
7. Sun tan oil / Lotion – Avoid getting sun tan oil / lotion on Gemstone surfaces. Remove with
Gemclean (see #2)
8. Re-seal coating. – For continued performance, re-seal the area every 2 – 4 years with
Gemstone Paver sealer, Master Builders DCS 110 clear sealer, Gemstone G-200 sealer,
or the appropriate Gemstone G-100C or G-200C colored sealer. For specific re-sealing
instructions, contact Gemstone Concrete Coatings, Inc.
By following these eight (8) simple guidelines, your Gemstone concrete topping system will
provide years of service and beauty.